YOU MAY ALSO LIKE
Earth Stains are not a finish in their own right and will need overcoating to give protection:
For flooring use: Mylac Matt, Satin or Gloss; Mylac Extra
Matt or Satin Matt; Earth Oil Natural.
For Furniture use: Waterbased, Cellulose, Pre- catalysed, Acid Catalysed, products or Polyurethane (single & two pack) lacquers; Shellac Waxes.
Firstly, ensure that all areas to be coated are well ventilated before, during and after application. Ensure the surface is smooth, clean and free from any contamination or sanding dust. Always test the stain on a small area prior to application on the whole area to be coated to ensure the colour is as desired. Apply the Earth Stain with a rag or brush and remove excess with a clean cloth within a few minutes of application.
On average per litre 10-12 m2 dependant on substrate texture and porosity.
Always replace the container lid, otherwise the oil could deteriorate. Store at a temperature above 5°C
Clean oiled surfaces with a damp cloth. For more soiled surfaces a small amount of liquid detergent may be added to the water. Old or worn oiled surfaces may be refurbished by abrading the surface and applying further coats of Danish Oil as in Application above. Exterior timber will require re-oiling at least annually – horizontal surfaceexposed areas may require more frequent re-coating.
Wash brushes/rollers immediately after use, in warm water containing a little detergent.
Health & Safety
Refer to Mylands MSDS before use.Use in a well ventilated environment.
To weaken the colour of Earth Stains use Earth Stain
Thinners (86 066 0001).
Earth Stains: 840g/litre
Earth Stain Thinners: 890g/litre