Furniture Cleaner and Reviver

THINNING

This paint has a high pigmentation. It can be thinned up to 45% and still be used as a second or third coat for a fine finish.

On porous surfaces (e.g. bare plaster): thin the first coat with up to 30% water or use a Mylands Primer.

Slightly porous surfaces: thin first coat with up to 15% water or use a Mylands Primer.

APPLICATION 

• Before use clean surfaces to be painted ensuring any grease, dirt or flakes are removed.
• Do not use in extremes of temperature. 
• Use between 8ºC and 30ºC. 
• Stir well before use. 
• This product is formulated for brush, roller or spray application.

DRYING TIME

Touch dry in 1-2 hours. Recoat in 3-4 hours.

CLEANING

For best results and to extend the life of your tools, wash brushes and rollers thoroughly immediately after use. Use warm water mixed with a small amount of mild detergent, working the paint out of the bristles or roller until the water runs clear. Rinse well and reshape brushes before allowing them to dry naturally.

Avoid letting paint dry on tools, as this can affect future application quality.

STORAGE

Ensure this product is stored in a frost-free environment and kept at a temperature above 5°C at all times.

Replace the lid securely after use to prevent contamination or drying. Store upright and away from direct sunlight or extreme heat. When stored correctly and unopened, the product will remain in good condition for up to 12 months from the date of purchase.