YOU MAY ALSO LIKE
Product Information
Knotting may be applied to both old and new timber. (Even very old timber can continue to exude sap). Knotting will hold back most natural timber resins (except the most aggressive ones).
Application:
Application is by brush.
Apply two coats of knotting allowing 2 – 3 hours between applications.
For best results leave at least overnight before applying a coat of paint primer.
For more information, see data sheet HERE
Application is by brush.
Apply two coats of knotting allowing 2 – 3 hours between applications.
For best results leave at least overnight before applying a coat of paint primer.
Coverage
On average per Litre 10-12 m2 dependant on substrate texture and porosity.
Thinning
Knotting should not require thinning, but may be thinned with Methylated Spirits (09 802 0741) if required.
Storage
Store in a cool place, replace lid on container after use to give an airtight seal.
Cleaning
Clean brushes in Methylated Spirits (09 802 0741).
Refer to Mylands Knotting MSDS before use.