Product Information
This Varnish is available in three sheen levels, matt, satin and gloss.
The Matt finish, in common with other matt finishes, has a lower durability than the satin and gloss finshes.
Do not use in extremes of temperature or humidity.
Use between 10ºC and 30ºC.
Do not use above 75% humidity.
Do not apply when rain or poor weather is imminent.
Stir well before use.
These products are formulated for brush or roller application and can be sprayed.
Ensure surfaces are sound, clean and dry before applying.
If applying over bare wood apply a thin even coat as a primer sealer (thin up to 10% water if required).
Apply at least two more coats.
If applying over a good condition varnished surface (lightly denib first), apply a minimum of two coats over hard wood and three over soft wood.
Coverage
On average per litre 8-10 m2.
Storage
This product must be protected from frost. Store at temperature above 5°C. Use within 12 months.
Cleaning
Wash brushes/rollers immediately after use, in warm water containing a little detergent.
Health & Safety
Refer to Mylands MSDS before use.
Thinning:
Should it be deemed necessary to thin, water should be used up to 10%.